Hello, Welcome to Taian Shelley Engineering Co., Ltd. the official website! Service hotline:+86-18653877118

Storage Equipment Production Enterprises

To build the first brand of grain storage

Green industry leading brands

Global Services Hotline:


Contact US

Contact person:   MS Shelley Jin
Mobile:  0086-18653877118
Whatsapp/Wechat: 008618653877118
Skype: shelley.jin

Current Location:Home » Service Center » Product Knowledge
Belt maintenance of the handling equipmnents
Come From:Taian Shelley Engineering Co., Ltd.Release Time:2015-10-4 9:53:35 Views:
In industrial production, if the conveyor belt proper care and maintenance, extended belt life, so as to effectively reduce production costs

    In industrial production, if the conveyor belt proper care and maintenance, extended belt life, so as to effectively reduce production costs, the paper describes the maintenance of the conveyor belt approach.
    1, the conveyor belt in the transport and storage should be kept clean to avoid direct sunlight or rain and snow shower dip, prevent contact with acids, alkalis, oils, organic solvents and other substances, and one meter away from the heating device.
    2, when the conveyor belt storage warehouse temperature should be maintained between a 18-40 ℃, the relative humidity should be maintained between 50-80%.
    During the 3, the conveyor belt storage products to be placed into a roll, can not be folded, turning once should quarterly conveyor belt.
    4 different types, specifications belt layers together should not use, the joint best use bonding method.
    5, the type of belt, structure, size, number of layers should be a reasonable choice based on conditions of use.
    6, the conveyor belt running speed is generally not more than 2.5m / s, block degree, wear resistance of materials and the use of large fixed pears discharge means should be used low.
    7, supporting the relationship roller conveyor drive roller and the conveyor belt fabric layer diameter, driving drum, drum bend and the roller groove angle design requirements should be based on the provisions of the conveyor, reasonable selection.
    In addition, the feed should be directed along the direction of the conveyor, in order to reduce the impact on the conveyor belt when the materials drop chute should be taken to reduce the material drop distance; conveyor belt feed section should be shortened by the roller spacing and use of buffer roller leakage of material, the conveyor belt conform with soft modest striker plate, so as not to stall excellent board material, with a surface scratch belt.

Previous:The core technolog...  Next:What's advantage o...【Close】